A logo sits on top of data. Every square it covers is a square the scanner can no longer read directly, and it has to be rebuilt from backup using error correction. So "how big can it be?" is really "how much can the code afford to lose?"
The rule of thumb: ≤ 20% of the width
A simple, safe default is to keep the logo's widest dimension at no more than about 20% of the code's width. A square logo at 20% width covers roughly 4% of the code's area — comfortably inside what Level H can recover (~30%), with room left over for print wear, glare and camera noise.
You can often push a little larger on a clean digital screen, and you should stay smaller for a code that will be printed small or scanned from far away. Bigger is not better: a smaller mark scans faster and from farther away.
| Logo width vs code width | Area covered | Verdict with Level H |
|---|---|---|
| 10% | ~1% | Very safe — fine even for small prints |
| 20% | ~4% | The sweet spot |
| 25% | ~6% | Usually still OK; test before printing |
| 30%+ | ~9%+ | Risky — leave headroom, don't cut it close |
Area scales with the square of the width, which is why a small change in width is a bigger change in covered area than it looks.
Three mistakes that break a logo code
1. Covering the corner squares
The three big finder patterns are how a scanner finds the code at all. Artwork over them doesn't just lose data — it can stop the code being detected. A good generator refuses to place a logo there. QRacade's layout never lets the logo touch them.
2. Forgetting contrast
A logo that blends into the background, or a dark logo directly on dark modules, makes the covered area harder to recover. Putting the logo on a clean, light pad — a small white margin around it — keeps the surrounding contrast intact and is easier on the scanner.
3. Busy or low-contrast artwork
Fine detail and soft greys are hard for a camera to resolve at scanning distance. Simple, high-contrast marks work best. If in doubt, test with a couple of phones at the real size.
File formats and tips
- PNG or SVG for sharp edges; a transparent background looks cleanest.
- A square logo is easiest to center and size predictably.
- Ensure the logo file's rights are yours to use.
How QRacade enforces this
The QR code with logo tool caps the logo inside the code's Level-H budget, keeps it clear of the finder patterns, and then decodes the finished design — so if a size or shape would break it, you'll see a warning instead of an unscannable download.
Related guides
QR code error correction levels
The budget your logo spends from.
BasicsThe QR code quiet zone
Keep the margin around the code clear.
DesignMinimum QR code print size
How small a logo code can safely go.
PrintingAdd your brand mark with a decode check
Upload your logo, adjust its size slider, and check the finished code before download: